- 36
- 823 778
tdurre3
Приєднався 9 чер 2009
"Redemption" by Syts
This is called Redemption and it's by Syts. It is played imperfectly, but I'll get there.
A few years ago I lost the ability to open my right hand. Grip was there but week. Doc said I wouldn't recover without surgery which I didn't do. I was never that good at piano beforehand but once I thought I would never play again I wished I would have given it more effort. Once I saw and heard Syts play his song, I knew I had to learn it.
With my hand still continuing to get better on its own, I decided to give it a shot and continue to give it the attention I should have given my newly found passion years ago. . I hope you enjoy my own "Redemption"! If you like what you hear, please hit that like and subscribe button! Thank you!
Thank you Syts for creating such a beautiful song with meaning far deeper than you can imagine!
A few years ago I lost the ability to open my right hand. Grip was there but week. Doc said I wouldn't recover without surgery which I didn't do. I was never that good at piano beforehand but once I thought I would never play again I wished I would have given it more effort. Once I saw and heard Syts play his song, I knew I had to learn it.
With my hand still continuing to get better on its own, I decided to give it a shot and continue to give it the attention I should have given my newly found passion years ago. . I hope you enjoy my own "Redemption"! If you like what you hear, please hit that like and subscribe button! Thank you!
Thank you Syts for creating such a beautiful song with meaning far deeper than you can imagine!
Переглядів: 1 671
Відео
Modded 7.3 cold start
Переглядів 1924 роки тому
My 2000 F350 hasn't been run in a while so I decided to fire it up.
Nut thief finally solved!
Переглядів 395 років тому
My dad's (Roger) mystery guest that is capable of unlocking cabinets that he stores nuts in, was captured! Although the key is in the lock, it is locked when vertical and unlocked when horizontal. His squirrel unlocks them so fast you can hardly see it but you can see the end result of the key being horizontal. They are smarter than you think!
It's ALIVE!!!
Переглядів 1097 років тому
Initial start up of my 7.3's new set up. New Full Force Diesel injectors (big), glow plugs, uvwh, Adrenalin high pressure pump, TS 6 position/single shot conversion.
"Twister" making a full pull in Laura, Illinois.
Переглядів 1799 років тому
This action took place August 29th 2015! Twister almost ends up in the apple orchard!
6500 pound weight class in Laura, Illinois. 8/2015
Переглядів 1119 років тому
24 mph and front wheel snaps off!!
My F350 dually vs 502 cid chevy at MC sand trap
Переглядів 1,4 тис.11 років тому
Drag racing our trucks at marshall county sand trap.
My 7.3 vs modified mud truck
Переглядів 88511 років тому
trucks drag racing in the dirt at marshall county sand trap
Modified truck racing at marshall county sand trap
Переглядів 27511 років тому
Modified 7.3 powerstrokes, head to head at Marshall County sand trap
The Barbarian at Marshall County Sand Trap
Переглядів 39911 років тому
The Barbarian was executing a qualifying round at the new Marshall County Sand Trap in Lacon, Illinois.
Don Garlits at Marshall County Sand Trap
Переглядів 9 тис.11 років тому
Don Garlits fires up his nitro powered Hemi Swamp Rat 12-A at Marshall County Sand Trap.
Hard running Chevy at Marshall County Sand Trap
Переглядів 81911 років тому
After the demolition derby we were still wanting more so along came a mud runner....
Playing in the mud at Marshall County Sand Trap
Переглядів 81611 років тому
After the demolition derby today I decided to take my propane injected Powerstroke diesel into the sloppy mud and give her hell. That didn't work quite as expected but was still fun.
John Deere 5420 at Marshall County Sand Trap
Переглядів 1,1 тис.11 років тому
John Deere 5420 prepping a mud bog at Marshall County Sandtrap
My homemade splitter doing what it was built to do
Переглядів 474 тис.11 років тому
My homemade splitter doing what it was built to do
Bobcat MT55 loading estimated 150 yr old oak
Переглядів 13 тис.12 років тому
Bobcat MT55 loading estimated 150 yr old oak
Home made 60+ton log splitter/sliding lift arm!
Переглядів 142 тис.12 років тому
Home made 60 ton log splitter/sliding lift arm!
Revenge for my log splitter part I
Переглядів 3,2 тис.13 років тому
Revenge for my log splitter part I
Late model John Deere G starting up
Переглядів 8 тис.15 років тому
Late model John Deere G starting up
Wooow nice Woodsplitter...
Thank you!
Nice job Sir,i like the way you treat your machine and logs with the respect they deserve,well done and gloveless too,a man after my own style,i'm 83 and still enjoy work, U.Kingdom.
Amazing rendition and a refreshing pace that lets the listener wrap around the amazing harmony.
Thank you!
Wood that large splits far better on a hip height vertical splitter like a power split or a axis. No more wresting around the pieces like that. Sad more people don't understand this before they build something that's so difficult to use like this splitter.
I appreciate your input however you must not understand how agonising it is on your back to have a vertical splitter splitting this type of wood. I designed this specifically to operate exactly as it does because of personal experience with other operating systems. Thanks for watching!
@@tdurre3 Please do some research on the names of the splitters I mentioned before making assumptions about being hard on your back. There is no bending and less stress on the back using the power split vertical splitter, same with the eastonmade axis. Even wolf ridge makes a vertical now because of demand. If you try a power split vertical, you would cry at the time you spent building a horizontal splitter. I process firewood for a living. Your splitter is based on old slow tech.
Very slow way to work
Compared to what? A splitting maul or ripping it with a chainsaw? This is a huge improvement over that. Thanks for watching!!
Nice clutch work.
Don Garlits can build them like no one else.
Great. Love the pace of your rendition, when I try to play it at that speed, my hands become feet 🤷♂️.
You can do it! Stick with it!
If you take your chainsaw and quarter those rounds it's so much easier to work them into firewood!
I built the splitter to avoid having to use a saw to cut them into smaller pieces. More expense especially when you hit metal inside of trees that old
🤘
dont kill yourself
I'll take that into consideration. Thank you!
You need front and rear outriggers for stability the tires bounce too much.
Wow just wow, I listen to this when stressed about the cruelty of people in life this gives me such peace
Thank you very much Pamela!
Very well done… this composition brings me to tears. You’ve played it beautifully.. well done indeed! ❤️
Thank you very much!
Awesome, well done!
Thank You Ann!
Sliding log lift is a great idea. GOD Bless
Strong tractor
Love it. The lift moving forward is a great addition. As a builder I notoced that if you had landing gear on the splitter you could stabilize the splitter with the same cylinder that you use to lift the log.
Amazing 🔥
Thank you!
How's your back? lol
Perfectly fine. Thanks for watching!
hi there just ran across this good job the big ones are a battle john
Yes they are and Thank you!
As Grandpa used to say "Firewood warm's you twice"
It doesn't warm me as much as it used to when I had to swing a maul... thank you for watching!
If that Big Round falls on you, it will smash you ! Where are your gloves and hearing protection. OMG is that a Big Round !! To bad you just don't have a single wedge on there.
That’s all good regarding the soft wood they are splitting, put a decent bit of hard wood on that thing and it would shit it’s self after a few hours
That's Oak. Look it up if you're that inexperienced. It's a hardwood. Thanks for watching!
There are a hundred different ways to build a log splitter. This is one of them. I like the sliding log lift. Great idea!
Thank you! Its still going strong!
Perhaps an outrigger and some bracing would serve... for the larger rounds.
Perhaps
Beats having to load it by hand
Good job, love the idea of the log lifter sliding to catch the big split logs. Not claiming to know more than anyone else, saw a great thing for big logs. A lifting arm with a winch on it, the winch rope fixes to the log by spinning a round disc with a big thread attached. The arm swings round above the table and takes the weight of the log if split off centre till it is a manageable size. Great design man!
That is absolutely awesome I love the old school drag cars Don harlots awsome
What a beast, well done!
Very cool! Tough little suckers the mini skid steers can be.
Wouldn't it be a lot faster to just use a hatchet ? Haahaa I'm kiddin ! I'm in the process of building something similar to it in my off time.
what a waste of time
Thanks for watching!!😁
@@tdurre3 I apologize. It is an impressive machine. I am just too impatient for the splitter, unless it's very knotty. I like my maul.
ive seen alot of splitters on you tube and you are the only one that has put the machine to the test and split a large knotty block and your machine done it easy well done cheers from tasmania
Thank you very much Bones!
done a good job to split a block that size with a 4 way wedge good splitter well done lad
Thank you! It's still running strong!
I love this guy's "GITTERDONE" atttitude!!
now that's antique tractor pulling the way it's supposed to be!
Dude do yourself a favor, buy or build a lumberjack attachment for the bobcat it would be split in manageable pieces in 2 min ;) this way you will be in a wheelchair by the end of the fall Lol ua-cam.com/video/kegmg2KnQv0/v-deo.html
Bobcats don't have the hydraulic pressure my splitter does. When you're splitting through multiple knots, you have to be able to cut the grain no matter what direction it's running. Don't get me wrong, for practical wood splitting a $5,000 attachment would work fine.
Hey I have that attachment and i split Rounds bigger than that, also it is 2,800 for it Gl@@tdurre3
Wow so much easier and hardly any work at all. You can hardly hear it so smooth. I bet the kids could even run it.
You did such a good job with that splitter how about building a sawmill ?I'm still welding on my home made v twin powered chain mill.More videos please...:)
Man that's a going concern.. fantastic machine!
Screw NHRA!
Just shook your hand last month , this is probably the strangest request that you have ever had, me and my wife are coming up on 16 years of marriage, we’re not rich by any means we’re comfortable, you are one of the greatest minds out there, She took me to your drag racing Museum on her birthday, how can I possibly,give her that back? Rock on you old swamp rat
I think you need some bigger logs.
Do you know where I could find some? LOL...
Try ripping the log into quarters it actually works well .big trees equal hard work
Nice splitter.A peavey would be kind of handy to move that big chunk of wood around,and be careful,those smaller pieces can jump out at you(see the knot?).It sure beats banging away with an axe , though.
Awesome wood splitter that was a huge log unbelievable nice machine......
That is frikkin awesome! I couldn't catch the giant pieces that fall off being a woman and all but it looks like with just a little change like a guard on the other side that even a kid could do it.
Some baby I want one
risk